Stain Magic for Wool Removes Organic Stains from Wool Rugs by Pro's Choice

Stain Magic^® for Wool Removes Organic Stains from Wool Rugs, like Furniture Stains, Mustard, Coffee and Tea.

from Bane-Clene^® Corp.

Stain Magic for Wool unleashes new chemistry for old problems.
Stain Magic for Wool is formulated specifically for use on natural fibers (wool, silk, cotton) which are are easily damaged by stronger spotters and stain removers.

Restrictions on Use: Professional Use Only. Keep out of reach of children.
Form: 3-part kit of clear, colorless liquids.
pH at Dilution: 8 (Parts “A” and “B” mixed).
pH of Neutralizer (Part C): 3.
Container Sizes: 3 pint bottles.
Shelf-life unmixed: 6 months.
Use Concentration: Parts “A” and “B” are mixed in equal parts, undiluted and applied to the stain. Part “C” is applied undiluted later.
Storage: Protect product from freezing. Keep container closed when not in use.
Container Size: Three pints.
Manufacturer: Pro’s Choice - CTI (Chemical Technologies Inc.^®)
Country of Manufacture: United States of America.
Flammability: Non-flammable.

In a clean beaker, mix equal parts solution “A” & “B”.
Keep out of reach of children.
Read label directions and cautions before using.
Always test on a hidden or inconspicuous area first.
CAUTION: Removal of some of the rug dye is always possible in this type of system!
Thoroughly hot water extraction rinse stained area with clear water.
Blot area dry with clean white towel.
Since the colors used to dye wool are often very easily damaged, apply “Part 3 CSS” using an eye dropper to just the colored fibers you wish to protect.
Using an eyedropper, apply mixed Stain Magic for Wool solution to stained fibers only.
Observe the stain and allow up to 15 minutes dwell time for stain to fade away.
As soon as stain has sufficiently faded, proceed to step 12. If stain HAS NOT faded sufficiently within 15 minutes, proceed to the next step.
Cover stain with a damp lightweight terry towel folded in half.
NOTE: This is a risky step! Apply steam heat from steam iron set at lowest steam setting.
Allow ONLY 3 seconds dwell time before you remove heat and check stain. If stain has not faded sufficiently, reapply heat for another 3 seconds. It should not be necessary to repeat this process more than twice.
Thoroughly extraction rinse area.
Saturate area to neutralize the stain remover solution with a dilute “Part 3 CSS” solution (3 parts water to 1 part CSS).
Extraction rinse area
For removal of a specific stain on wool or silk, use the Pro’s Choice 50 page Stain Guide.