StoneTech Polishing Powder for Marble, Limestone, Travertine, Terrazzo

StoneTech™ Polishing Powder for Marble, Limestone, Terrazzo, Travertine and Other Natural Stone Surfaces

Limestone Honing and Polishing

StoneTech Marble Polishing Powder is a non-acidic polishing compound that also removes light scratches, mild acid etching, light wear patterns and restores the surface to an even polished finish.

Features and Benefits of StoneTech Polishing Powder:

  • Removes light scratches.
  • Removes mild acid etching.
  • Restores natural polish.
  • Rejuvenates polish.
  • Cleans and polishes.
  • Easy application.
  • Non-acidic - contains no poisonous, hazardous oxalic acid so commonly used in other polishing powders. Oxalic acid can cause early failure of marble and limestone!
  • Does not require to be neutralized.
  • No hazardous vapors.
  • Polishing Powder is designed to Polish most:

Directions for Polishing Stone with StoneTech Polishing Powder:

  1. We STRONGLY recommend that you purchase the Stone, Tile & Grout - Cleaning, Restoration & Protection Set of Two Training “How-To” DVDs and also attend the Stone Care hands-on training class.
  2. Always test in a small inconspicuous area to determine ease of application and desired results.
  3. Allow new grout installations to cure for a minimum of 72 hours prior to polishing.
  4. Make sure surface is flat and smooth.
  5. Deep scratches or strong acid etching may require StoneTech Honing Powder applied in multiple applications.
  6. Make sure surface is clean, dry and free of waxes and coatings.
  7. If surface is heavily soiled, pre-clean with Klenz-All™ heavy-duty alkaline cleaner and degreaser as applicable.
  8. Mask off baseboards, carpet, etc. with protective plastic and / or blue painter’s tape.
  9. If you are using Polishing Powder following the use of Honing Powder products, ensure that the surface is well rinsed and a new polishing pad is used.
  10. Apply about 1/2 cup Marble Polishing Powder plus 1 cup clean water to stone surface.
  11. Refinish using a hand orbital sander or a weighted heavy-duty 175 rpm floor machine at 130 to 140 lbs., 175 rpm, fitted with a Gorilla® Hogs Hair Natural Hair Floor Pad.
  12. Keep compound wet while buffing with plenty of water. Add Polishing Powder as needed.
  13. Buff area until desired level of polish is achieved.
  14. Rinse well and use a wet vacuum or hot water extraction unit to remove all excess compound.
  15. NOTE: It is best to use Honing Powder 800 before using Marble Polishing Powder.
  16. Coverage: Approximately 800 to 1,200 sq. ft. per jar of Marble Polishing Powder, depending on type of stone and level of polish desired.
  17. Charge: At least $1.00 per square foot.
  18. To maintain the stone’s natural beauty, seal the surface with Stone Sealer, Impregnator Pro™, Sta-Clene® or BulletProof™
  19. For maintenance cleaning, use StoneTech Revitalizer™ or StoneTech All Purpose Stone & Tile Cleaner.
  20. NOTE: THIS PROCESS SHOULD ONLY BE USED BY EXPERIENCED, TRAINED TECHNICIANS. DEFINITELY NOT FOR THE HOMEOWNER!!

Additional Stone, Ceramic and Porcelain Tile & Grout Information:

Related Stone Care Videos:

Stone, Ceramic and Porcelain Tile & Grout Care Products:

Link to a separate page or tab in the Secure Bane-Clene Store to Order StoneTech Polishing Powder:

VIDEO: How to Hone and Polish Marble, Limestone, Travertine, etc.

Video shows how to remove scratches and dull areas from Marble and other soft stones and bring the surface to a high polish shine.

Customer Service

Mon-Fr, 9am-5pm EST

Call Us

+1 800-428-9512

Get in Touch

orders@baneclene.com

Address

1728 S Park Ct, Chesapeake, VA 23320