For use on marble, limestone, travertine and terrazzo.
Removes Scratches
Removes Acid Etching
Easy to use
Prepares soft stones such as marble for high gloss polish with Polishing Powder.
180 Grit StoneTech® Honing Powder to Restore Marble, Limestone, Travertine and Terrazzo Floors and Countertops
from Bane-Clene® Corp.
Use StoneTech Non-Acidic Honing Powder to remove scratches, acid etching, wear patterns on soft stones such as marble, limestone, travertine and terrazzo and comes in 5 abrasive grits for a variety of honed finishes on soft stones like marble and limestone - from deeply honed to satin. Prepares stone for polishing and shining, if desired.
Marble counter tops are a very popular design trend which are commonly installed in bathrooms and kitchens. A marble counter top can really accentuate the look and feel of a home. However, cleaning products and just usage will dull the surface and remove the sealer from your marble counter tops requiring maintenance over time. Acidic foods, salad dressings, vinegar, soft drinks, wine can etch the surface of a marble counter-top. Honing and polishing the marble counter top can bring it back to a factory finish. Of course, we strongly suggest granite instead of marble for kitchen countertops because granite is not acid sensitive and is harder to scratch and dull.
An uneven finish, dull spots, scratches or etch marks can diminish the elegant appearance of a soft stone floor. Limestone, marble, travertine and terrazzo floors can be polished using the appropriate StoneTech honing and polishing powders to restore the desired finish, whether matte, semi-gloss or gloss finish.
Features and Benefits of StoneTech Honing Powders:
Formerly called “Euro-Hone”.
Removes Scratches.
Removes Acid Etching.
Removes wear patterns on soft stones.
Acid-free (No oxalic acid that will eventually pit stone).
Safe to Use.
Easy Application.
Designed for professional use.
Develops Honed Surface.
Cleans and Hones.
Prepares soft stones such as marble for high gloss polish with Polishing Powder.
Available in 5 grit levels - 180, 280, 400, 600 and 800 grit.
The lower the grit number, the more aggressive the hone, just like with sandpaper.
Typical Honing Charge: At least $1.25 per square foot for each honing level.
Properties & Specifications:
Form: White, free-flowing powders.
Coverage: Depending on the type of stone, surface texture, and level of hone desired, coverage is up to 2000 square feet per pound for the 400 Grit & 180 Grit and up to 1500 square feet per pound for the 280, 600 & 800 Grit.
How to Hone Travertine, Terrazzo, Marble and Limestone Floors:
Read label directions and cautions before using.
NOTE: THIS PROCESS SHOULD ONLY BE USED BY EXPERIENCED, TRAINED TECHNICIANS.
We STRONGLY suggest viewing the set of DVD’s on how to hone and polish soft stones and come to the training class in Indianapolis before doing honing jobs.
The lower the grit number, the more aggressive the hone, just like with sandpaper.
Test in an inconspicuous area to determine the ease of application and desired results.
Make sure surface is clean, dry and free of waxes and coatings.
If surface is heavily soiled, pre-clean with StoneTech Klenz-All™, rinse and dry.
Mask off baseboards, carpet, etc., with protective plastic and/or blue painter’s tape.
If you are using a variety of abrasive grits, ensure that the surface is well rinsed and a new Gorilla® Hogs Hair Natural Hair Floor Pad is used for each changeover.
Apply about 1/2 cup Honing Powder plus 1 cup clean water to stone surface.
Refinish using a hand orbital sander or weighted heavy-duty Heavy-Duty Rotary Floor Machine at 130 to 140 lbs., 175 rpm, fitted with a pad driver and a Gorilla natural hair pad.
Keep compound wet while buffing with plenty of water. Add Honing Powder as needed.
Buff area until desired level of hone is achieved.
Rinse well and use a wet vacuum or hot water extraction unit to remove all excess compound.
Clean equipment with water.
How to achieve a polished finish on marble and limestone:
Use successively higher grits of Honing Powder to close the face of the stone and follow with StoneTech Polishing Powder as applicable.
Proper care of honed and polished stone such as marble:
Highly alkaline, acidic, ammoniated, and/or abrasive cleaners are not necessary for daily maintenance and may also degrade the sealer, adversely affecting stain resistance.
To maintain the stone’s natural beauty, seal the surface with Stone Sealer, Impregnator Pro™, Sta-Clene® or Bullet Proof>™
For maintenance cleaning, use StoneTech Revitalizer™ or StoneTech All Purpose Stone & Tile Cleaner.
NOTE: THIS PROCESS SHOULD ONLY BE USED BY EXPERIENCED, TRAINED TECHNICIANS. DEFINITELY NOT FOR THE HOMEOWNER!!
Additional Stone, Ceramic and Porcelain Tile & Grout Information:
