NOT FOR SALE IN CALIFORNIA. May not be shipped by air.
Sta-Clene Formula 940 Soil & Stain Repellent
Sta-Clene is a solvent-based, advanced-generation protector for carpet, rugs, upholstery and stone with exceptional oil, water and soil repellency. It protects stone, marble, grout and soft surfaces from spills and stains.
Features and Benefits
- Contains no silicone, which would void carpet warranties and cause yellowing.
- Provides a barrier against dry soil and both water-based and oil-based spills.
- Reduces soiling and staining on stone surfaces such as marble, travertine, slate, limestone, granite, terrazzo, sandstone, Mexican tile, saltillo, pavers, non-glazed ceramic tile, non-glazed porcelain tile and non-epoxy grout, plus soft surfaces.
-
Not for use on epoxy grout, vinyl, rubber, VCT, laminates, wood or solvent-sensitive surfaces.
- Also works on soft, absorptive surfaces like carpets, rugs and upholstery.
Restrictions on Use
- Professional use only. Not for retail sale.
- Keep out of reach of children.
- Do not dispose of Sta-Clene or any solvent-based product into drains.
- Keep away from fire, open flame and sparks.
- Use only in an open, well-ventilated area.
- Do not aerosolize. Some sensitive smoke alarms may go off during spraying.
- Avoid breathing vapor or spray mist. Avoid contact with eyes or skin.
- Remove pets and small children from the area until the surface is dry.
- May not be shipped by air.
- Not for sale in California.
Directions
- Keep out of reach of children.
- Read label directions and cautions before using.
- Always test on a hidden or inconspicuous area first.
- Ready to use on porous hard and soft surfaces.
- Apply in a fine mist using a solvent-resistant, water-free sprayer at less than 60 psi, such as Bane-Clene's stainless steel pump-up sprayer. Do not use a power sprayer and do not mist into the air where you might breathe the fumes.
- May also be applied with a microfiber applicator.
- Coverage: 200 to 300 sq. ft. per quart.
- On stone and grout, make sure the surface is dry before applying. Let it soak in, then wipe off excess with towels or a bonnet. Do not leave it on the surface.
- On glazed ceramic tile, squeegee excess into the grout after applying and before drying, then remove from the glazed tile with towels or a bonnet before the product dries.
- Reapply after any deep cleaning.
- If used on leather, pretest for dye stability and gloss damage from previous coatings, and do not rub the Sta-Clene in.
- Clean the pressure sprayer daily.
Related Information, Articles and Videos
