StoneTech Exterior Heavy-Duty Stone, Brick & Masonry Sealer
StoneTech™ Heavy-Duty Exterior Stone & Masonry Sealer
STONETECH Heavy Duty Exterior Sealer is a solvent based, natural look sealer which offers heavy duty protection, water repellency and weather resistance to exterior natural stone and masonry surfaces.
A superior water repellent and stain protector for exterior stone:
- Brick
- Pavers
- Granite - Cleaning, Care and Protection
- Marble - Polishing, Care, Sealing
- Limestone
- Saltillo and Mexican Tile
- Sandstone and Flagstone
- Slate
- Terra-Cotta
- Terrazzo
- Travertine
Advantages and Benefits to Using Exterior Stone Sealer:
- Formulated with advanced, water-based, silicone technology that protects against water-based stains.
- Lasts for years even under extreme sunlight.
- Easy to Use.
- Inhibits Efflorescence
- Preserves Natural Look.
- Great for Building Facades.
- Excellent Water Repellency.
- Non Yellowing.
Properties & Specifications:
- Restrictions on Use: Professional Use Only. Keep out of the reach of children. Keep cool. Use only outdoors or in a well-ventilated area.
- Form: Liquid.
- Appearance: Clear.
- Color: Colorless.
- Size: Quarts.
- Manufacturer: StoneTech™ Professional™ / Laticrete International (formerly DuPont).
- Country of Manufacture: United States of America.
- Storage: Store in a well-ventilated place. Keep container tightly closed.
- Odor: Solvent.
- Solubility: Not soluble in water.
- Use pH: Not applicable with solvents.
- Coverage: 200-1200 sq ft per gallon square feet per gallon, depending on porosity of stone.
- Expected Wear (With Proper Care): 5-10 years on exterior surfaces. For optimal results, reapplication is recommended every 3-5 years for exterior surfaces or 5-7 years for interior applications.
- Flash Point: 104°F. (Closed Cup).
- VOC content: 724 grams/liter.
Directions for Using Heavy-Duty Exterior Stone & Masonry Sealer:
- Keep out of reach of children.
- Read label directions and cautions before using.
- Wear protective eyewear and rubber gloves.
- Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results.
- Allow new grout installations to cure for a minimum of 72 hours prior to application.
- Make sure surface is clean, dry, and free of waxes and coatings and loose debris.
- Mask off and protect any baseboards or adjacent areas to avoid splashing and overspray onto surfaces not intended to be treated.
- Liberally apply 1-2 coats with a brush, paint roller, or solvent resistant low pressure sprayer. On porous surfaces the first coat will soak in considerably. Additional coats will cover approximately double the previous coat.
- Highly porous material will need longer cure time between coats. Allow time to saturate, about 5-15 minutes per coat. Wipe off any excess residue prior to complete drying.
- If, after drying, a light haze appears, lightly dampen a clean towel with Heavy Duty Exterior Stone & Masonry Sealer and wipe surface to remove.
- Clean equipment with mineral spirits or Saf-T-Solv™.
- For maximum oil and water repellency, allow Heavy Duty Exterior Stone & Masonry Sealer to cure for 24 hours, then apply two coats of StoneTech Professional Impregnator Pro™ as per label directions.
- Do not walk on surface for a least 4 hours. Full cure is achieved in 24-72 hours.
- Routine Cleaning of Exterior Stone, Brick and Masonry: To maintain the stone’s natural beauty, clean surface as needed with StoneTech Professional Revitalizer or All Purpose Stone & Tile Cleaner.
- Heavy Duty Cleaning of Exterior Stone, Brick and Masonry: Pre-clean with StoneTech Professional Klenz-All™ Heavy Duty Stone, Tile and Grout Cleaner.
Additional Stone, Ceramic and Porcelain Tile & Grout Information:
- Dates for Training Classes for Cleaning Professionals
- Efflorescence
- Granite
- Limestone
- Marble
- Mexican and Saltillo Tile
- Sandstone
- Serpentine
- Slate
- StoneTech™
- Travertine
- VIDEO: How to Protect and Seal Natural Stone like Marble, Limestone, Granite, Travertine
- VIDEO: How to Seal and Protect Exterior Stone & Masonry
VIDEO: How to Seal and Protect Exterior Stone & Masonry - from Bane-Clene
StoneTech Heavy-Duty Exterior Stone & Masonry Sealer from Bane-Clene provides “natural look” protection for exterior natural stone & masonry.