Cream Spot & Stain Removal from Carpets and Rugs

Procedure to Remove Cream:

  1. IMPORTANT: Do not use high temperature cleaning or heat activated stain removal procedures on these types of stains.
  2. Scrape up any loose material
  3. Mix Pro-Zyme Heavy Soil & Grease Digester according to directions on bottle.
  4. Apply Pro-Zyme solution to stained fibers to thoroughly wet fibers.
  5. Gently but thoroughly agitate fibers to break up and emulsify deposit. Dwell time will help the biochemistry work for you here.
  6. Thoroughly rinse via water extraction leaving carpet as dry as possible (do not use an acid rinsing agent here).
  7. Apply Stain Blotter Anti-Wicking Absorbent Powder to absorb any wicking that might occur during drying.
  8. When spot is completely dry, vacuum thoroughly.
  9. Also, you may experience wicking on heavier deposits. If deposit is heavy enough to have soaked through backing and into pad, replace the contaminated pad and clean carpet backing.
  10. TIP: Stain 1 Stain Remover will make most re-occurring stains disappear.

Related Spot and Stain Removal Products:

Free Bane-Clene Information PackageBane-Clene Paper Catalog

Free packet of information about Bane-Clene can be obtained by calling toll-free 1-800-428-9512 (U.S. ONLY!). Your information packet will include a full color catalog and price addendum. Packets will arrive in approximately 2 weeks through standard United States Mail.

You can also order the packet at the Catalog Request Form.

Print this page