X-Cide Odor Killer Super Concentrate

X-Cide Odor Killer from CTI Pro's Choice

   X-Cide is for Outstanding for Immediate and Permanent Removal of Odors Caused by Pets, Skunk, Mold, Dead Animals and Much More.
   X-Cide, the newest technology in odor removal, integrates the science of Absorption, Pairing, Modification and Encapsulation to safely and permanently eliminate odors without leaving objectionable fragrance or sticky residue behind.

Features and Benefits of X-Cide Deodorizer:

  • Encapsulating odor killer.
  • Permanently eliminates foul odors.
  • Super concentrated - variable dilutions.
  • Works fast; no dwell time.
  • Safe for stain-resistant carpet.
  • Leaves no objectionable fragrance or sticky residue behind.
  • Broad spectrum deodorizing action.

Use X-Cide Odor Killer Super Concentrate for:

  • Urine.
  • Feces.
  • Vomit.
  • Skunk.
  • Pet bed, upholstery and mattress odors.
  • Deodorizing shampoo for animal care.
  • General mal-odor of carpet, pet runs etc.
  • Freshen up while cleaning.
  • Putrefaction (decomposing flesh and organic matter, dead bodies).

Properties & Specifications:

  • Restrictions on Use: Professional Use Only. Keep out of reach of children.
  • Form: Nearly odorless, colorless, clear liquid.
  • Use pH: 7.
  • Safe for: stain-resistant nylon carpet.
  • Storage: Protect product from freezing. Keep container closed when not in use.
  • Container Size: Pint bottles.
  • Manufacturer: Pro’s Choice - CTI - Chemical Technologies International Inc.
  • Country of Manufacture: United States of America.
  • VOC compliant?: Yes.
  • Flammability: Non-flammable.
  • Catalog Number: 35016.

Instructions and Directions for X-Cide Super Concentrate Deodorizer:

  • Important Note: If cleaning must be performed at the time of treatment, apply the X-Cide to the dry carpet prior to any cleaning and re-moisten surface fibers with X-Cide after the cleaning.
  • For strong embed odors (Urine, vomit, feces):
    1. Prepare a dilute solution of 1 part X-Cide concentrate to 8-16 parts water.
    2. Flood the contaminated area sufficiently to soak the surface and liberally penetrate into all sub surfaces where the odor may have migrated.
    3. Allow a 10 minute dwell time then vacuum away excess solution from the area.
    4. If possible allow area to dry before cleaning.
    5. Odors should be gone within minutes.
    6. If odor remains, it is because X-Cide has not been in contact with all the contamination.
  • For surface odors:
    1. Prepare a dilute solution of 1 part X-Cide concentrate to 16 parts water.
    2. Spray apply this solution to wet out the contaminated area and allow the area to dry.
    3. A ULV fogger may be used for this application.
    4. When using this method of application, wear an NIOSH approved organic vapor respirator during the process.
  • Pet bed, upholstery and mattress odors:
    1. X-Cide is an excellent treatment to eliminate odors from pet beds, upholstery or mattress odors.
    2. Prepare a solution of 1 part X-Cide to 16 parts water.
    3. Using a trigger sprayer, mist the surface of the fabric and brush gently to improve penetration.
    4. Allow to dry before using.
  • General malodor of carpet, pet runs etc.:
    1. To eliminate pet body odors from carpets, automobiles, pet runs, etc., prepare a solution of 4 oz. X-Cide concentrate per 1 gal. water.
    2. Use a pump type sprayer to evenly apply the solution.
    3. Allow area to dry before using.
  • For cleaning solutions:
    1. X-Cide can take your efforts to the next level by not only cleaning but also giving you a fresh crisp surface that resists odors.
    2. Mix X-Cide directly into your cleaning solution at a ratio of 1 to 2 oz. Of X-Cide concentrate per gal. of cleaning solution.
    3. Proceed to clean using your normal cleaning process.
  • Treatment of skunk odor transferred from a pet onto upholstery, carpet or other surface:
    1. Prepare an 8 to 1 dilute solution of X-Cide.
    2. Using a trigger sprayer, wet the contaminated surface.
    3. Gently but thoroughly brush the area to assure contact between all contamination then blot or vacuum away the solution.
    4. Re-wet the area with the X-Cide solution.
    5. Do not rinse.
    6. Allow surface to dry completely.
  • Dead body odor:
    1. Putrefaction is the decomposition of animal proteins which results in the formation of amines which have a putrid odor.
    2. Noxious Sulfide and Mercaptan odors are also produced in this environment.
  • Corrective deodorizing procedure for strong embedded odors (urine, vomit, feces):
    1. Remove the visible contamination.
    2. Prepare a dilute solution of 1 part X-Cide concentrate to 8-16 parts water.
    3. Flood the contaminated area with the X-Cide solution sufficiently to soak the surface and liberally penetrate into all sub surfaces where the odor may have migrated.
    4. Agitate with a brush and allow a 10 minute dwell time during which the X-Cide will be absorbing odorous material and separating contamination from the substrate.
    5. Vacuum away the X-Cide solution and liquefied contamination.
    6. Prepare your detergent cleaning solution and add 8 oz. X-Cide concentrate to each gallon of cleaning solution. Use this solution in your extraction cleaning procedure.
    7. If possible, allow area to dry before cleaning.
    8. Odors should be gone within minutes.
    9. If odor remains, it is because X-Cide has not been in contact with all the contamination.

Related Odor Control Deodorizer Information:

Related Odor Control Deodorizer Products:

Link in a separate page or tab to the Secure Bane-Clene Store to Order X-Cide Super Concentrate is below:

Free Bane-Clene Information PackageBane-Clene Paper Catalog

Free packet of information about Bane-Clene can be obtained by calling toll-free 1-800-428-9512 (U.S. ONLY!). Your information packet will include a full color catalog and price addendum. Packets will arrive in approximately 2 weeks through standard United States Mail.

You can also order the packet at the Catalog Request Form.

Print this page