Stone Sealer by StoneTech® for Porcelain & Mexican Tile, Limestone, Marble, Granite and Other Stone Surfaces

Stone Tech Stone Sealer Protects Mexican and Saltillo Tile from Stains

StoneTech Sealer provides economical advanced-generation polymer protection against spills and stains for natural stone, including marble, granite, limestone, travertine, slate, saltillo, sandstone and other stone floors, countertops, etc.

Features and Benefits of Stone Sealer:

  • Stone Sealer provides economical “natural look” protection for all natural stone including:
  • Economical and easy to use.
  • Advanced new-generation polymer formula.
  • Advanced penetrating microbond protection
  • Water based.
  • Provides “natural-look” protection against oil and water-based stains.
  • Bonds with the stone for improved wear resistance.
  • Environmentally safe and low odor.
  • Non-flammable.
  • Standard protection against most stains.
  • Makes cleaning stone easier.
  • Interior and exterior use.

Properties & Specifications:

  • Restrictions on Use: Do not breathe mist or vapor. Use with adequate ventilation.
  • Form: Clear, pale amber liquid.
  • Odor: Mild.
  • Use pH: 9 - 11.
  • Use Concentration: Undiluted.
  • Storage: Protect product from freezing. Keep container tightly closed when not in use. Store in a cool and well-ventilated place. Keep out of reach of children.
  • Coverage: Up to 900 square feet per gallon for a single coat application.
  • Expected Wear (with proper care): Up to 5 years on interior surfaces. Up to 3 years on exterior surfaces. For best results, reapply annually.
  • Container Size: Single gallons.
  • Manufacturer: StoneTech® / Laticrete® International.
  • Country of Manufacture: United States of America.
  • VOC content: 2 g/l excluding water.
  • Flammability: Non-flammable.

Directions for Sealing Stone with Stone Sealer:

  1. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure a minimum of 72 hours prior to application. Make sure surface is clean, dry and free of waxes and coatings.
  2. Read label carefully and follow Stone Sealer label directions!
  3. Ensure cap is closed and sealed, and shake well before use.
  4. Mask off and protect any baseboards or adjacent areas to avoid splashing and overspray onto surfaces not intended to be treated.
  5. Liberally apply an even coat using a paint pad, roller, brush or low-pressure sprayer.
  6. Allow sealer to penetrate the surface for 10-15 minutes. During this time, keep the surface wet with sealer, adding more sealer as needed. DO NOT ALLOW SEALER TO COMPLETELY DRY ON THE SURFACE
  7. Thoroughly wipe dry the entire surface with clean absorbent towels.
  8. A second coat may be needed for porous, absorbent surfaces. If a second coat is required, it should be applied within 30-40 minutes from the initial application as directed as directed above.
  9. Should a sealer residue appear, re-wet the impacted section of the surface with sealer. Agitate the surface with a white nylon scrubbing pad to loosen residue and wipe dry with a clean, absorbent towel.
  10. A full cure is achieved in 24-72 hours. Use of the treated surface may resume in 6-8 hours. If use of the surface must resume sooner, cover the treated surface with red rosin paper to protect it until full cure is achieved.
  11. Clean tools used during application with water.

Proper Care for Sealed Stone, Tile and Grout:

  • Highly alkaline, acidic, ammoniated, or abrasive cleaners or bleach are not necessary for daily maintenance and may also degrade the stone sealer used, adversely affecting stain resistance.
  • To maintain the stone’s natural beauty, clean surface as needed with a neutral pH cleaner such as StoneTech Revitalizer™ Stone Cleaner and Protective Seal Refresher or All Purpose Stone & Tile Cleaner.
  • For tough or difficult to remove soil use StoneTech Klenz-All™ heavy-duty alkaline cleaner and degreaser, a nylon scrubbing pad or a long handled stiff bristle brush.
  • Please note: Prior to using any cleaning material on a tile, stone, etc. installation, test a discrete area or scrap piece of tile to insure desired results.
  • If stone floor or countertop is cleaned with bleach or strong cleaners and the Stone Sealer is partially removed, reseal.
  • For best results, reapply Stone Sealer annually.
  • NOTE: While sealers will repel soil and both oil- and water-based stains, they WILL NOT prevent etching of marble, limestone, etc. by acids such as soft drinks, fruit juice, lemons, vinegar, etc.

Additional Stone, Ceramic and Porcelain Tile & Grout Information:

Related Stone Care Videos:

Stone, Ceramic and Porcelain Tile & Grout Care Products:

Link to a separate page or tab in the Secure Bane-Clene Store to Order Stone Sealer is below:

Free Bane-Clene Information PackageBane-Clene Paper Catalog

Free packet of information about Bane-Clene can be obtained by calling toll-free 1-800-428-9512 (U.S. ONLY!). Your information packet will include a full color catalog and price addendum. Packets will arrive in approximately 2 weeks through standard United States Mail.

You can also order the packet at the Catalog Request Form.

Print this page

VIDEO: How to Protect Natural Stone like Granite and Marble with Stone Sealers from Bane-Clene

Bane-Clene has both the StoneTech products and hands-on training by experienced professionals to protect natural stone, including granite, marble and tile. Learn how to serve your present customers.