Spray 1™ Electric Sprayer for Carpet Cleaning Jobs

Spray 1 electric sprayer for carpet deodorizers, protectors and presprays

The Spray 1 is a compact 1-gallon light (5 pounds empty) electric design sprayer that sprays low viscosity liquids such as carpet protectors, traffic lane spotters, anti-microbials and deodorizers with reach over 37 feet.

Benefits of the Spray 1 Electric Sprayer:

  • Electric sprayer is so much lighter and less tiring to use than pump-up sprayers.
  • Constructed with solvent-resistant viton seals that allow you to run both water and chemicals through the sprayer.
  • It weighs only 5 pounds when empty, making it easy to transport from site to site.
  • Comes with two containers so you can quickly and easily change chemicals, even in the midst of a job, without losing time and money. Keep several on hand to quickly switch between your most used chemicals!
  • Just be sure that each jug is properly labeled with its contents.
  • Just plug in and effortlessly spray your deodorizers or carpet protectors.
  • The corded Spray 1 sprayer will give you peace of mind since you no longer have to worry about a dead battery in the middle of a big job.
  • The application is much better than with a hand pump-up sprayer because a finer, more even coating is applied at higher pressure.
  • You’re through applying product in half the time!

Properties & Specifications of the Spray 1 Electric Sprayer:

  • 115 Volt
  • Viton® Seals In Pump & Trigger
  • 50 psi - .33 gpm with 8004SS V-Jet Tip
  • 30 Foot Cord Winds Quickly
  • 6 Foot Coil Hose - 18 Inch Wand
  • 1 Gallon Container (changes quickly)
  • Each Sprayer Sold With 2 Containers
  • Light - Only 5 Pounds Empty Weight
  • 13" x 6.5" x 10" High
  • Compact, Versatile, Uniform Spray
  • Manufacturer: Multi-Sprayer.
  • Country of Manufacture: United States of America.

Instructions:

  • Just plug in, snap on the spray tool and effortlessly spray away with better and faster results than ever.
  • For longer pump life, rinse by spraying fresh water after use of solvents and at the end of each day.

Spray 1 SchematicTo service the Spray 1:

  1. RINSE EACH NIGHT WITH WATER!
  2. Unplug from electrical outlet.
  3. Remove the 3 black nylon buttons from the bottom of the housing (they are reusable) with a straight blade screw driver.
  4. Carefully remove the bottom of the housing with screwdriver.

Related Information and Articles:

Related Products:

Link to a separate page or tab in the Secure Bane-Clene Store to Order Spray 1 is below:

Free Bane-Clene Information PackageBane-Clene Paper Catalog

Free packet of information about Bane-Clene can be obtained by calling toll-free 1-800-428-9512 (U.S. ONLY!). Your information packet will include a full color catalog and price addendum. Packets will arrive in approximately 2 weeks through standard United States Mail.

You can also order the packet at the Catalog Request Form.



Print this page