{"product_id":"hi-shine-25-floor-finish-for-vct-resilient-floor","title":"Hi-Shine 25 Floor Finish for VCT Resilient Floor","description":"\u003cul\u003e\n\u003cli\u003eHigh Shine UF is a floor finish with excellent leveling and adhesion properties.\u003c\/li\u003e\n\u003cli\u003eHi-Shine UF Floor Finish provides optimum buff response with a dramatic \"wet\" look gloss on resilient floors.\u003c\/li\u003e\n\u003cli\u003e1 Gallon \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable width=\"95%\" border=\"0\" cellspacing=\"15\" cellpadding=\"0\"\u003e\n    \u003ctbody style=\"font-family: Arial; font-size: 16px; color: #3f3151;\"\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e\n            \n            \n            \u003ch1 style=\"font-family: Arial; font-size: 24px; color: #4f6128; font-weight: bold;\"\u003e\n            Hi-Shine 25 Gives a Brilliant Shine to VCT Resilient and Other Floors.\n            \u003c\/h1\u003e\n            \u003cp style=\"font-family: Arial; font-size: 20px; color: #3f3151; font-weight: bold;\"\u003e\n            from Bane-Clene\u003csup style=\"font-size: 0.75em;\"\u003e®\u003c\/sup\u003e Corp.\n            \u003c\/p\u003e\n            \u003cimg src=\"https:\/\/www.baneclene.com\/Uploads\/HiShineFloor.jpg\" alt=\"Hi-Shine 25 Floor Finish\" title=\"Image of shiny floor from Hi-Shine 25\" style=\"float: right; margin-bottom: 3px; margin-left: 3px; width: 288px; height: 135px;\"\u003e\n            \u003ch2 style=\"font-family: Arial; font-size: 20px; color: #3f3151; font-weight: bold;\"\u003e\n            Hi-Shine 25 UF Floor Finish provides optimum buff response with a dramatic, tough, durable “wet look” gloss on resilient VCT and other floors\n            \u003c\/h2\u003e\n            \u003ch2 style=\"font-family: Arial; font-size: 20px; color: #3f3151; font-weight: bold;\"\u003eFeatures and Benefits of High Shine 25 Floor Wax:\u003c\/h2\u003e\n            \u003cul style=\"font-family: Arial; font-size: 16px; color: #595959; margin-left: 30px;\"\u003e\n                \u003cli\u003eHigh Shine 25 is a floor finish with excellent leveling and adhesion properties.\u003c\/li\u003e\n                \u003cli\u003eDurable metal cross-linked polymer ensures a tough, non-powdering finish, which stands up to the heaviest foot traffic.\u003c\/li\u003e\n                \u003cli\u003eQuick drying formulation with a durable polymer designed to withstand heel marks, soil, scuffs and high foot traffic.\u003c\/li\u003e\n                \u003cli\u003eCan be used with low, high or ultra-high speed buffers.\u003c\/li\u003e\n            \u003c\/ul\u003e\n            \u003ch3 style=\"font-family: Arial; font-size: 18px; color: #3f3151; font-weight: bold;\"\u003eProperties \u0026amp; Specifications:\u003c\/h3\u003e\n            \u003cul style=\"font-family: Arial; font-size: 16px; color: #595959; margin-left: 30px;\"\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRestrictions on Use:\u003c\/strong\u003e Professional Use Only. Keep out of reach of children.\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eForm:\u003c\/strong\u003e Liquid.\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eAppearance:\u003c\/strong\u003e Milky opaque.\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e Single Gallons.\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e United States of America.\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e Protect product from freezing. Store in original tightly closed container when not in use.\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOdor:\u003c\/strong\u003e Mild, typical floor finish odor.\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Opaque white.\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eUse pH:\u003c\/strong\u003e 8 - 9.\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e 0.54%.\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eFlammability:\u003c\/strong\u003e Non-flammable.\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 2,500-3,000 per square feet.\u003c\/li\u003e\n            \u003c\/ul\u003e\n            \u003ch3 style=\"font-family: Arial; font-size: 18px; color: #3f3151; font-weight: bold;\"\u003eBuilding a Shine on a VCT Resilient Tile Floor with Hi-Shine 25 Floor Finish:\u003c\/h3\u003e\n            \u003col style=\"margin-left: 30px; font-size: 16px; font-family: Arial; color: #595959;\"\u003e\n                \u003cli\u003eCheck floor, making sure that it is totally dry and free of any old finish or stripper residue.\u003c\/li\u003e\n                \u003cli\u003eIf there is a whitish cast, this could indicate stripper or old finish still remains on the floor. If necessary, re-strip the floor.\u003c\/li\u003e\n                \u003cli\u003eFloor temperature should be above 54 degrees F. for proper curing of  finish.\u003c\/li\u003e\n                \u003cli\u003ePour High Shine 25 into a clean bucket. Apply polish to floor with a clean rayon mop, such as the Wood-Solv Lint-Free Mop.\u003c\/li\u003e\n                \u003cli\u003eWhen applying finish, the single biggest problem that occurs is applying coats of floor finish before the previous coat has dried thoroughly. The applicator head will tear at the finish from its weight and the re-emulsify the coating. This dulls the finish and can create mop marks that are hard to buff out. \u003c\/li\u003e\n                \u003cli\u003eApply the proper number of coats of finish using the following procedures:\u003c\/li\u003e\n                \u003col style=\"font-family: Arial; font-size: 16px; color: #595959;\"\u003e\n                    \u003cli\u003ePour the High Shine floor finish into a clean bucket equipped with a wringer. If a clean bucket is not available, use a liner in the bucket so that the finish does not become contaminated. Place a medium-size rayon mop, such as the Lint Free Mop, in the finish and let soak for 5-10 minutes. A cotton mop should never be used for applying finish because it will leave lint in the dried finish.\u003c\/li\u003e\n                    \u003cli\u003ePlace the bottom half of the mop in the wringer and wring out the bottom half of the mop. Avoid excessive buildup of finish in low-traffic areas by not applying finish to within 12 inches of the walls until later coats.\u003c\/li\u003e\n                    \u003cli\u003eApply the finish in an 8-10 foot area. Frame the area by using the wet mop to make a “U” around the two long sides and one short side of the area. Starting at the bottom, fill in the “U” using side-to-side figure 8 strokes. Flip the mop over halfway down the “U” and use the other side. Do not lift the mop head while applying finish.\u003c\/li\u003e\n                    \u003cli\u003eUsually, floor finish will dry in about 30 minutes. However, this is just a general rule. Third and fourth coats take longer to dry than first or second coats. Additionally, high humidity and temperature can greatly delay drying.\u003c\/li\u003e\n                    \u003cli\u003e\n\u003cstrong\u003eNOTE: \u003c\/strong\u003eSealed surfaces require 2-4 coats of finish while non-sealed floors will require 3-6 coats.\u003c\/li\u003e\n                    \u003cli\u003eBe sure to clean and dry the mop after use and only use it for application of finish.\u003c\/li\u003e\n                \u003c\/ol\u003e\n            \u003c\/ol\u003e\n            \u003ch3 style=\"font-family: Arial; font-size: 18px; color: #3f3151; font-weight: bold;\"\u003eMaintaining the Finish of a VCT Resilient Tile Floor:\u003c\/h3\u003e\n            \u003cul style=\"margin-left: 30px; font-size: 16px; font-family: Arial; color: #595959;\"\u003e\n                \u003cli\u003eProper maintenance can extend the strip and re-coat cycle by several months or up to a year!\u003c\/li\u003e\n                \u003cli\u003eDry mop daily to remove loose dirt and impediments.\u003c\/li\u003e\n                \u003cli\u003eMix 1-2 ounces of Neutral Floor Cleaner in a clean mop bucket.\u003c\/li\u003e\n                \u003cli\u003eEither mop floor with solution or use in a rotary scrubber with a red floor pad.\u003c\/li\u003e\n                \u003cli\u003eLet floor dry thoroughly.\u003c\/li\u003e\n            \u003c\/ul\u003e\n            \u003ch3 style=\"font-family: Arial; font-size: 18px; color: #3f3151; font-weight: bold;\"\u003eBurnishing and Dry Buff a VCT Resilient Tile Floor:\u003c\/h3\u003e\n            \u003cul style=\"margin-left: 30px; font-size: 16px; font-family: Arial; color: #595959;\"\u003e\n                \u003cli\u003eFollow steps above. Use the appropriate colored dry buffing pad to enhance the floor’s shine.\u003c\/li\u003e\n                \u003cli\u003eA floor should be burnished as often as necessary to return the floor to the appearance that the customer requires.\u003c\/li\u003e\n                \u003cli\u003eMost high traffic areas are burnished each day. Before burnishing, the floor should be properly prepared: swept of all loose dirt, scrubbed or mopped.\u003c\/li\u003e\n                \u003cli\u003eThere should be an adequate number of coats of finish on the floor for burnishing to succeed.\u003c\/li\u003e\n                \u003cli\u003eBurnishing helps maintain the clean, glossy appearance while enhancing durability and slip resistance.\u003c\/li\u003e\n                \u003cli\u003e\u003cstrong\u003eNever burnish a dirty floor - this only leads to a “dirty, shiny floor”!\u003c\/strong\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\n            \u003ch3 style=\"font-family: Arial; font-size: 18px; color: #3f3151; font-weight: bold;\"\u003eScrub and Re-Coat:\u003c\/h3\u003e\n            \u003cul style=\"margin-left: 30px; font-size: 16px; font-family: Arial; color: #595959;\"\u003e\n                \u003cli\u003eFollow steps 1 and 2 above. Reapply 1 to 2 coats of Hi-Shine 25 following the label directions for buffing after the new finish is dry.\u003c\/li\u003e\n            \u003c\/ul\u003e\n            \u003ch3 style=\"font-family: Arial; font-size: 18px; color: #3f3151; font-weight: bold;\"\u003ePricing for Stripping, Sealing and Applying Floor Finish to Resilient and Vinyl Floors:\u003c\/h3\u003e\n            \u003cul style=\"margin-left: 30px; font-size: 16px; font-family: Arial; color: #595959;\"\u003e\n                \u003cli\u003eThere is no “standard” charge or “going rate” for janitorial work and the going rate for stripping, waxing and maintaining resilient floors varies by region.\u003c\/li\u003e\n                \u003cli\u003eThe charge for a complete strip and wax job can run from 20 cents to 40 cents per square foot in the United States.\u003c\/li\u003e\n                \u003cli\u003eMuch depends on what contractors charge in your area, if you provide all supplies or charge the materials to your customer, the condition of the floor, if you must move chairs, tables, cabinets, etc., and other variables.\u003c\/li\u003e\n                \u003cli\u003eFor cleaning, spray buffing or burnishing a floor,  the rates are usually about 1\/2 the rate of a complete strip and wax.\u003c\/li\u003e\n            \u003c\/ul\u003e\n            \u003ch3 style=\"font-family: Arial; font-size: 18px; color: #3f3151; font-weight: bold;\"\u003eRelated Articles and Information:\u003c\/h3\u003e\n            \u003cul style=\"margin-left: 30px; font-size: 16px; font-family: Arial; color: #595959;\"\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/www.baneclene.com\/Professionals\/Content.aspx?xps=MTk3Nw==\" target=\"_blank\" title=\"Health hazards of vinyl-asbestos floors\"\u003eAsbestos Flooring\u003c\/a\u003e\u003c\/li\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/www.baneclene.com\/Professionals\/Content.aspx?xps=NTE4\" target=\"_blank\" title=\"Stripping a Resilient Tile Floor:\"\u003eResilient VCT Floor Care\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding-right:12px\"\u003eUse Concentration:\u003c\/th\u003e\n\u003ctd\u003eUndiluted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding-right:12px\"\u003eCoverage:\u003c\/th\u003e\n\u003ctd\u003e2,500-3,000 sq. ft. per gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding-right:12px\"\u003eUse pH:\u003c\/th\u003e\n\u003ctd\u003e8.0 – 9.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSafety Data Sheets\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1065\/3536\/files\/hishinefloorfinishuf.pdf\" target=\"_blank\" rel=\"noopener\"\u003e61030 HiShineFloorFinish (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Bane-Clene","offers":[{"title":"Default Title","offer_id":48016415686843,"sku":"61030","price":38.45,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/7500\/9467\/files\/61030.jpg?v=1782481197","url":"https:\/\/www.baneclene.com\/products\/hi-shine-25-floor-finish-for-vct-resilient-floor","provider":"Bane Clene TruckMounts \u0026 Solutions","version":"1.0","type":"link"}