Skip to content
Cart

Solv-A-Clene™ Upholstery and Drapery Dry Cleaning Solvent

Solv-A-Clene™ Upholstery and Drapery Dry Cleaning Solvent

Technician cleaning drapes with Solv-A-Clene

Solv-A-Clene is a dry cleaning solvent product designed especially for “S” Cleaning Code “on-location” upholstery and drapery dry cleaning.

Solv-A-Clene is designed to clean upholstery labeled as Code “S” dry-clean-only by the furniture manufacturer where using water-based or detergent-based cleaners may cause excessive shrinkage, dye bleeding and water stains.

Even though upholstered furniture often comes with Code “S” dry-cleaning-only tag, very few types of fabric furniture actually must be dry cleaned. Upholstery manufacturers frequently recommend dry cleaning because it limits their liability. Of course, there are rare cases of upholstered furniture that truly does require dry cleaning.

Features and Benefits of Solv-A-Clene:

  • Solv-A-Clene is a blend of highly active, volatile dry solvents with a wetting agent.
  • Solv-A-Clene contains no fuel oil, kerosene, water, fat, oil, chlorinated solvents or carbon tetrachloride.
  • It should never be diluted.
  • Solv-A-Clene is designed for cleaning articles that cannot be wet-cleaned.
  • NOTE: Cleaning with solvents will never clean as well as wet-cleaning.
  • Can be used with the Bane-Clene dry cleaning machine or simply used with white towels.
  • Solv-A-Clene cannot be shipped via air.
  • Do not dispose of Solv-A-Clene in drains.
  • NOT FOR RETAIL SALES!
  • Certain restrictions may apply in some states.

Properties & Specifications:

  • Restrictions on Use: Professional Use Only. Keep out of reach of children.
  • Form: Clear, colorless liquid.
  • Odor: Solvent - Add Per-Scent™ for better fragrance and better mask solvent odor.
  • Use Concentration: Undiluted.
  • Storage: Keep container closed when not in use. Keep away for open flame.
  • Container Size: Single gallons.
  • Manufacturer: Bane-Clene Corp.®.
  • Country of Manufacture: United States of America.
  • VOC content: 6.334 lbs/gal.
  • Flammability: Flash Point: 129°F.

Directions for Dry Cleaning Upholstery and Drapes with Solv-A-Clene:

  1. Add Per-Scent® Fragrance Additive to the Solv-A-Clene before using.
  2. Always use Solv-A-Clene in a well ventilated area.
  3. No smoking while dry cleaning upholstery and drapery.
  4. Keep away from ALL open flame sources.
  5. NOTE: The solvents evaporating into the air may set off a smoke alarm!
  6. Test all fabrics for colorfastness in an inconspicuous area. Determine if piece should be wet or dry cleaned, then proceed accordingly.
  7. Vacuum thoroughly to remove loose soil and grit.
  8. Carefully inspect upholstery for tears, worn areas, missing legs, etc. Note same and call customer before proceeding if conditions are severe. Heavily soiled areas should receive special attention during dry cleaning operation and then may require special wet spotting after dry cleaning.
  9. Almost all fabrics can be dry cleaned safely. However, some upholstery dyes may be solvent soluble and should be tested prior to cleaning. These usually are a bright print on a white background.
  10. Move the furniture piece onto one or more Furniture Pad. Keep carpeting or hardwood floors dry while cleaning furniture with the Bane-Clene fully padded and quilted furniture cleaning blanket.
  11. Lightly overspray heavily soiled areas and allow to stand for 2 to 3 minutes.
  12. With the Bane-Clene Dry Cleaning Machine, work hand tool across the piece with the same technique used in wet cleaning.
  13. Concentrated soil should receive special attention. Use vacuum freely after solution stroke. Repeat as necessary.
  14. Feather out all wet spots to the nearest divider (piping, seam, etc.). Dry cleaning solution rings are as difficult to remove as water rings.
  15. After dry cleaning, mist any remaining spots with Bane-Clene Saf-T-Solv™, allow spot to stand for 2 to 3 minutes, carefully rub with turkish towel or sponge using a motion from outside to the center of the spot. Vacuum again. Repeat if necessary.
  16. Use a soft bristled brush to set the texture of fibers where necessary. A hand-held hair dryer will be useful to force dry any damp spots after brushing.
  17. Apply Sta-Clene® Furniture Protector at this time if it is part of the job.
  18. Thoroughly wipe all exposed wood surfaces and polish to complete the job.

Additional Upholstery Cleaning Information:

Link to a separate page or tab in the Secure Bane-Clene Store to Order Solv-A-Clene is below: