Step-by-Step Procedures to Remove Betadine or Iodine Stains from Carpets:
- Extraction clean (preferably with water) the spot out of the carpet to remove all surface contamination.
- Blot the spot as dry as possible with a dry white clean towel.
- Mix equal parts of Solution A and Solution B Red Relief by Pro’s Choice in a clean container or use the Red Relief Dual Chamber Sprayer Kit.
- Apply the mixed solution to the stain liberally to wet all the stained carpet fibers.
- Prepare a damp towel and wring out until moderately damp.
- Cover the stain with the damp towel.
- Apply steam heat to the towel for 1 - 3 minutes, using a steam iron filled with water and set at the lowest steam setting.
- DO NOT SET IRON DIRECTLY ON CARPET!
- Because of its low melting point, do not use an iron on olefin.
- Apply the iron directly over the towel covering the stain. Check the stain once every minute.
- When the stain disappears from; the carpet or changes to a light yellow, discontinue heat and remove the iron and the towel.
- Be alert for fibers that are not colorfast - if you see carpet color loss, discontinue the heat immediately!
- Extraction rinse the treated area to remove any residue and dry thoroughly.
- If a heavy spill, use Stain Blotter Anti-Wicking Absorbent Powder to prevent wicking.
- IMPORTANT: Red Relief is not self-neutralizing and MUST be rinsed from carpet after treatment. Always test an inconspicuous area before using.

