BASE UNIT (3-D) for most Bane-Clene®Truckmount Carpet Cleaning Machines
3-D Base Unit for most Bane-Clene Truckmount Carpet Cleaning Machines
from Bane-Clene® Corp.
The Bane-Clene 3-D Base Unit allows the carpet cleaning company the ability to achieve truck-mounted results when connected with Bane-Clene solution and recovery tanks.
Specifications
-
ELECTRICAL SYSTEM:
All electric - 110V - 60 Hz - Single Phase
1 1/2 HP Vacuum Pump Motor with sealed bearings and manual reset overload protector (no maintenance).
1/2 HP Solution Pump Motor with sealed bearings and manual reset overload protector (no maintenance).
Power Supply:
2 - 15 ft power cords
All wiring 12 GAW - vinyl wrapped - insulated - HD
HD cord restraints on power cords for safety.
2 - HD power switches with watertight covers
Lighted heater switch with watertight cover
Separate vacuum and solution pump ampmeters to monitor equipment performance.
Amperage:
Vacuum: 9 amps at 75% restriction.
Solution pump: 4 amps at 150 PSI
Solution pump with heater: 16 amps. -
VACUUM SYSTEM:
Pump:
Positive displacement - HD cast iron housing.
HD lobe-type impellers for long life.
2" inlet and 2" outlet ports.
Greater vacuum than previous unit.
Easy access for oil and grease maintenance.
Intake filter: Stainless steel. -
Capacity:
20 gallons recovery.
Stainless steel vacuum relief valve.
Tank access door for cleaning and maintenance. -
Exhaust:
Large - HD construction - baffled - steel silencer with clean-out ports.
Allows for VERY quiet operation indoors.
Exhaust disconnect for maintenance. -
HEATER SYSTEM:
1500 watt immersion type heater with thermostat and indicator light.
12 amp draw.
Stainless steel heat exchange housing 400 PSI rated with easy access clean-out hardware.
Insulated heater housing with high pressure relief valve.
Lighted indicator on/off switch. -
SOLUTION SYSTEM:
Pump:
Positive displacement HD cast iron housing.
Requires no maintenance.
Pressure:
150 PSI operating pressure.
30% more GPM than previous unit.
0.6 GPM optimal water usage.
Filters:
50 mesh - primary - HD brass filter.
50 mesh - secondary brass inline filter.
Capacity:
20 gallons solution.
Construction:
Stainless Steel. -
CONSTRUCTION:
14 gauge stainless steel with 3/16" HD aluminum component/base plate.
Motor intake vents and louvered doors.
4 strap mounting brackets with velcro straps on cylinder for carrying cords, hoses, cleaning heads, etc.
1 1/2" recovery dump valve
4 non-marring 5" heavy-duty easy rolling casters
Front and rear swing-up handles.
Gauge Package:
Glycerin filled vacuum lift and solution pressure gauge.
2 amperage gauges.
Hour meter.
Easy access, removable gauge panel. -
Weight and Dimensions:
Approximately 270 pounds.
18" W x 40" H x 48" L
Accessories:
- Complete Training
- Standard Installation
- Operations Manual.
Warranty:
- Warranty: 5-Year Conditional Warranty.
Related Truckmount Carpet Cleaning Equipment Articles and Information:
- Bane-Clene Equipment Guide Overview
- Bane-Clene Equipment Maintenance Videos
- Compare US to ANY Other Carpet Cleaning Truckmounted and Portable Equipment
- Leasing Used & New Carpet Cleaning Equipment from Bane-Clene®
- Noise Pollution from Carpet Cleaning Equipment
- Portable Carpet Cleaning Extractors From Bane-Clene
- Troubleshooting Guide for Bane-Clene Truckmount Carpet Cleaning Machines
- Why Bane-Clene Over All Other “Truck-mounted” Carpet Cleaning Equipment?
- Why Choose Bane-Clene® Carpet Cleaning Equipment?
- Winterizing Bane-Clene Carpet Cleaning Equipment