Skip to content
Cart

Maxi-Mount® Truck-Mount Electric Carpet Cleaning Machine

The Bane-Clene Maxi-Mount® Truckmount Electric Powered Carpet Cleaning Machine

from Bane-Clene® Corp.

Maxi-Mount Truckmount Carpet Cleaning Machine

The Maxi-Mount Is the Perfect Entry-Level Electric Truck-Mount Carpet Cleaning Machine from Bane-Clene.

Features and Benefits:

  • The Bane-Clene Maxi-Mount truck-mounted carpet cleaning machine is quiet and dependable.
  • It is not necessary to operate truck engine while cleaning - saving fuel and avoiding carbon monoxide poison dangers.
  • Easily portable in less than 45 seconds.
  • For truck-mounted operations, use the standard 150 feet of hose, or more if the job demands it.
  • Hoses store neatly on reels which are built onto the storage tanks.
  • Job setup time is less than three minutes. Lessened operator fatigue means better workmanship.
  • The dependable electric power drive provides years of virtually trouble-free operation in addition to being the most energy-efficient equipment ever developed.
  • Totally electric, with no dangerous or expensive fuels required.
  • Quieter than most gasoline and propane powered truckmounts.
  • Lowest maintenance cost in carpet cleaning industry.
  • 5-year written warranty.
  • Flexible Financing Available.
  • Please Call 800-428-9512 for more information.
  • Not Available for Online Purchase.

Properties & Specifications:

Triple heating system: Otherwise wasted engine heat automatically heats your cleaning solution to the right temperature and an auxiliary electric heater is used for water temperature control. The large insulated tanks enable you to clean all day without having to refill or dump water. The system is totally electric, with no dangerous or expensive fuels required. It is not necessary to operate truck engine while cleaning.

Designed for installation into a 3/4 ton van. 1-ton is recommended.

SPECIFICATIONS for the BASE UNIT

Electrical System

  • All electric - 110V - 60 Hz - Single Phase
  • 1 1/2 HP Vacuum Pump Motor with sealed bearings and manual reset overload protector (no maintenance)
  • 1/2 HP Solution Pump Motor with sealed bearings and manual reset overload protector (no maintenance)

Power Supply

  • 2 - 15 foot power cords
  • All wiring 12 GAW - vinyl wrapped
  • Insulated - HD cord restraints on power cords for safety
  • 2 - heavy-duty power switches with watertight covers
  • Lighted heater switch with watertight cover
  • Separate vacuum and solution pump ampmeters to monitor equipment performance

Amperage

  • Vacuum: 9 amps at 75% restriction
  • Solution pump: 4 amps at 150 PSI
  • Solution pump with heater: 16 amps

Specs for the Solution System

Pump

Positive displacement - HD cast iron housing. Requires no maintenance

Heading Pressure

150 PSI operating pressure. 30% more GPM than previous unit. 0.6 GPM optimal water usage

Filters

50 mesh - primary - HD brass filter. 50 mesh - secondary - brass inline filter.

Capacity

20 gallons solution

Construction

Stainless Steel

Specs for the AUXILIARY TANK SYSTEM

SOLUTION SUPPLY SIDE (same specifications as Para-Mount®)

Construction:

Heavy-Duty, Stainless Steel, Bolts to Vehicle Frame for optimal safety. Special tilted construction assures proper drainage.

Accessories

Steel Reel Assembly (complete with 150 feet Solution Hose, 150 feet Vacuum Hose, and Two 100 feet Power Supply Cords), 12 inch and 4 inch Cleaning Head Package (w/Stainless Steel Guide Handle), Complete Training, Standard Installation, Operations Manual.

Warranty: 5-Year Conditional Warranty.

FOB Indianapolis, IN

“Proudly Made in the USA”
Proudly Made in America

Related Truckmount Carpet Cleaning Equipment Articles and Information:

Related YouTube Bane-Clene Equipment Maintenance Videos:

  • Video: How to Install Bane-Clene Truckmount Carpet Extractor into van
  • Video: How to lubricate, change oil, grease the blower, back flush, maintain the Bane-Clene Truckmounted Carpet Cleaning machines