The Bane-Clene Para-Mount® Electric Truckmount Carpet Cleaning Equipment from Bane-Clene® Corp.

The Ultimate One-Crew Carpet Cleaning Truckmount Machine

Para-Mount truckmount extractor

One of the major advantages of the Bane-Clene Para-Mount® is the ability to disconnect the base unit from the van and tanks and go portable! Now you can clean that multi-story building! Go where others can’t with go the Perma-Mount with its base unit!

The Para-Mount truckmount carpet cleaning machine is the ultimate one-man truckmounted carpet cleaning system - the result of years of development and refinement. It is designed as a truck-mounted operation with enough water capacity to work all day and take away the waste water, which eliminates the illegal dumping of dirty water onto streets or retention ponds. Yet, its base unit can quickly be disconnected from the main tanks and used as a portable.

Special Features of the Para-Mount

  • The Para-Mount has the lowest maintenance time and cost in the industry.
  • The low profile design distributes weight evenly in the van.
  • The Para-Mount has the power of a truckmount, with the mobility of a portable extractor so you can go anywhere, including multi-story buildings where other truckmounts can’t go!
  • Of special note are the deluxe features, consisting of
    • Electric automatic hose reels.
    • Power-assisted loading and unloading.
    • Stainless steel recovery tank.
    • Stainless steel solution tank.
  • The Para-Mount provides the same fast drying time, positive moisture control, chemical blending system and quick setup time - both truck-mounted and portable - as are found in the other Bane-Clene carpet cleaning extractors.
  • Designed for installation into a 3/4 ton van; 1-ton is recommended.

PARA-MOUNT SPECIFICATIONS:
Solution System:
Pump:
Positive displacement - HD cast iron housing.
Vacuum System:
Pump:
Positive displacement - HD cast iron housing.
HD lobe-type impellers for long life.
2" inlet and 2" outlet ports.
Greater vacuum than previous unit.
Easy access for oil and grease maintenance.
Intake filter: Stainless steel.
Capacity:
20 gallons recovery.
Stainless steel vacuum relief valve.
Tank access door for cleaning and maintenance.
Exhaust:
Large - HD construction - baffled - steel silencer with clean-out ports.
Allows for VERY quiet operation indoors.
Exhaust disconnect for maintenance.
Heater System:
1500 watt immersion type heater with thermostat and indicator light.
12 amp draw.
Stainless steel heat exchange housing 400 PSI rated with easy access clean-out hardware.
Insulated heater housing with high pressure relief valve.
Lighted indicator on/off switch.

AUXILIARY TANK SYSTEM
SOLUTION SUPPLY SIDE
Construction:
HD, 14 Gauge,Stainless Steel, Mounts to Recovery tank with special Bolted Brackets, solution / detergent dilution gauge on tank.
Capacity:
120 Gal. w/3" Capped Fill Port.
Dimensions:
20" W, 28" H, 48" L.

Heaters:
Tank immersion heater with 25 ft cord with holding strap and 20 ampere heavy-duty plug and receptacle.
All Stainless Steel Heat Exchange System. System uses otherwise wasted engine heat to keep water temperature at safe level. Truck engine heats water while driving at no additional cost to you.
Insulation:
1" FSK Fiberglass Insulation, Protected by Metal Tank Cover. Maintains water temperature.
Weight:
120 lbs.
Gauge Package:
Temperature, Sight Gallonage Indicator for accurate temperature control and chemical blending.

Electrical System:
All electric - 110V - 60 Hz - Single Phase
1 1/2 HP Vacuum Pump Motor with sealed bearings and manual reset overload protector (no maintenance).
1/2 HP Solution Pump Motor with sealed bearings and manual reset overload protector (no maintenance).
Power Supply:
2 - 15 ft power cords
All wiring 12 GAW - vinyl wrapped - insulated - HD
HD cord restraints on power cords for safety.
2 - HD power switches with watertight covers
Lighted heater switch with watertight cover
Separate vacuum and solution pump ampmeters to monitor equipment performance.
Amperage:
Vacuum: 9 amps at 75% restriction.
Solution pump: 4 amps at 150 PSI
Solution pump with heater: 16 amps.

Accessories:

  • Electric Steel Reel Assembly.
  • 150' Solution Hose.
  • 150' Vacuum Hose.
  • Two Power Supply Cords.
  • 12" Floor Tool.
  • 4" Upholstery
  • Stainless Steel Guide Handle for Floor Tool.
  • Standard Installation.
  • Complete Training Program/
  • Operations Manual.
  • Ramp with Power-Assisted Loading and Unloading.

Related Truckmount Carpet Cleaning Equipment Articles and Information:

Related YouTube Bane-Clene Equipment Maintenance Videos:

  • Video: How to Install Bane-Clene Truckmount Carpet Extractor into van
  • Video: How to lubricate, change oil, grease the blower, back flush, maintain the Bane-Clene Truckmounted Carpet Cleaning machines

Related Carpet Cleaning Machines and Products:

Bane-Clene Carpet Cleaning Videos


VIDEO: NCAA Headquarters Cleaned by Bane-Clene®

Carpets and Upholstery Cleaned using the Para-Mount® Truckmount Carpet Cleaning Machine - Going Portable with Base Unit, using Bane-Clene Preface® Pre-Spray Traffic Lane Spotter, LCA®-256 Detergent with Booster™ for Cleaning.

VIDEO: Installation of Bane-Clene Truckmount Carpet Cleaning Machines into a Van

How to Install Bane-Clene Truckmount Carpet Cleaning Equipment into a Van.


Free Bane-Clene Information PackageBane-Clene Paper Catalog

Free packet of information about Bane-Clene can be obtained by calling toll-free 1-800-428-9512 (U.S. ONLY!). Your information packet will include a full color catalog and price addendum. Packets will arrive in approximately 2 weeks through standard United States Mail.

You can also order the packet at the Catalog Request Form.



Print this page