Roofing Tar
Spot & Stain
Removal

from Bane-Clene®

  1. Apply Pro Solve Gel to contaminated fibers.
  2. Agitate gently with brush.
  3. Apply Power-Gel and agitate gently.
  4. Hot water extraction rinse.
  5. If stain remains:
    1. reapply Pro Solve Gel.
    2. Cover spot with clean, dry, terry cloth towel.
    3. Apply steam heat with iron set at mid range temperature for 30 seconds.
    4. Blot spot thoroughly with dry towel.
    5. Apply Pro Solve Gel to spot.
    6. Agitate gently but thoroughly to emulsify and suspend any residual tar.
    7. Thoroughly rinse using hot water extraction.
  6. To prevent wicking, heavily sprinkle Stain Blotter on area to absorb any material that wicks up.
  7. The customer can vacuum up the Stain Blotter the next day.
Print