New products

from Bane-Clene®

Last updated: 5/5/08


Aerosol Stone Grout Sealer

Keep grout looking pristine and beautiful with a high-performance aerosol grout sealer in a convenient 13.5 oz. aerosol can that can be applied just two hours after grout is installed.

  • Provides maximum protection against stains.
  • Keeps grout looking new.
  • Apply only two hours after grouting.
  • For all natural stone, ceramic and porcelain tile.


Hi-Pressure Pump Assembly
for Bane-Clene® Truckmounts

The Hi-Pressure Pump Assembly is designed to connect to any of the Bane-Clene truckmounts for high pressure cleaning of stone and grout. Unit includes all brass fittings needed to connect to the Bane-Clene systems.
More information is on the Bane-Clene web site at http://www.baneclene.com/catalog/hi-pressure.html
or call us at 800-428-9512.


Accelerator for Brush & Bonnet

Accelerator for Brush & Bonnet
Brush & Bonnet Accelerator is an oxygen booster which increases the cleaning performance of Brush & Bonnet - brightens the carpet and removes discolorations caused by organic soils.
Dilutions:
Add Accelerator to your Brush & Bonnet cleaning solution at a ratio of 1 pint of Accelerator per 8 gallons of cleaning solution.
Add Accelerator to your cleaning solution and stir to assure even blending. The solution should be prepared just prior to use since it will lose strength over time.
Caution: Accelerator is not recommended for use on natural fibers such as wool, silk and sisal.
pH: 4.
1 Pint. Catalog No. 35064 ................... $5.24


New Improved Bane-Clene Olefin Pre-Conditioner

Olefin fibers are frequently difficult to clean because of their tenacious affinity for oils.

New Improved Bane-Clene Olefin Pre-Conditioner is a super-concentrated formulation of surfactants and an oil-digesting enzyme specifically formulated to emulsify and break down heavily compacted oil and grease, especially in carpet traffic lanes and other hard to clean areas - particularly on olefin and on berber carpet or on nylon.

Heavy oily soils: Mix 10 parts of water to 1 part product in a pressure sprayer, preferably stainless steel. If using an injection sprayer preset at 1:10, add to the injection sprayer jug undiluted. Allow at least 15 minutes before cleaning. If extremely soiled loop-pile, agitate the carpet with a deck brush or with a low-speed buffer and soft carpet brush.

Light to moderate soil: Use at 1:30 with water. Apply the diluted mixture to the carpet. Allow at least 15 minutes before cleaning.

For extremely oily olefin carpets and rugs, add Energy to the Olefin Preconditioner

1 Gal. Catalog No. 10985 ................... $54.95
More detailed information is on the Bane-Clene web site www.baneclene.com/catalog/olefin.html


StoneTech™ High Gloss Stone Sealer. Enhance the beauty of natural stone and tile with an innovative, water-based gloss finishing sealer that provides subtle shine and delivers long-lasting protection against oil- and water-based stains. Water-based low-VOC, low-odor formula provides a brilliant shine and protects against water- and oil- based stains.


Rug Restorer for removing severe pet urine from rugs using submersion.


Sporicidin Disinfectant Solution Bactericide, Virucide, Kills Mold & Mildew, Fungicide, Turberculocide.

MRSA (Methicillin-resistant Staphylococcus aureus) is in the headlines regarding infections especially in schools. We have an article on line about MRSA and want our customers to know that MRSA can be controlled with the product Sporicidin.

Additionally, we have a bulletin by the manufacturer of Sporiciding on the Guidelines for MRSA Cleaning and Disinfection in Adobe Acrobat format.


Forensic Investigation Kit to detect pet urine spots


Grip-It® Rug Pads. Don't just stop with cleaning your customers' rugs. Protect them by using the proper rug pads too.


Zonyl 8929B Encapsulating Spotter and Traffic Lane Spotter from DuPont™


Block Out to block old pet stains from detection with black light.


Tabac-Attack™ Tobacco odor decontaminant & odor counteractant for odors caused by tobacco smoking

Tobacco odors are caused by a combination of burning tobacco and the accumulation of odorous sticky burnt tobacco related residues on surfaces. Residues from burning tobacco products form odorous coatings on materials that slowly release malodors. These odorous residues build up and accumulate over time having a cumulative effect. Heavy smoking over a long period of time results in stubborn and severe tobacco related smoke odor.

Tabac-Attack instantly counteracts tobacco related smoke odors on surfaces. Tabac-Attack provides lasting odor control on treated surfaces.