Water Claw® Flood Tool

  • Water Claw Flood Tool    Designed for quick and easy flood extraction without removing carpet and pad. Works on all types of carpet with pad, including cut pile and looped/berber.
  •    Even in black water floods, the Water Claw Flood Tool helps you by removing more water to easily remove carpet and pad.
  •    The Water Claw Flood Tool, combined with drying processes that leave the carpet and pad intact, translate into significantly greater year-end profits.
  •    NOTE: Does not offer any advantage in water extraction where there is no pad under the carpet and will not extract water from old-fashioned orange waffle pad. On high looped berbers, use the smaller tool.
  •    Vacuum tube is made of Lexan for durability and will accept a 1" hose cuff inside and 2" hose cuff outside.
  •    The adjustable, waist-high handle easily detaches from tool for storage.
  •    The Water Claw reaches all the way into corners and along wall edges for quick and thorough extraction results.
  •    Comes in three sizes: Small: 8" x 14", Medium: 10" x 17", Large: 12" x 21".
  •    The large size is intended for maximum extraction speed on jobs covering large areas.
  •    The medium size is needed by more active restoration companies when doing berber style carpet.
  •    The small size is for work in confined areas and for use with portables.
  •    Click here for Directions on how to use the Water Claw Flood Tool.
  •    A typical 300 square foot area of flooded carpet and pad can be deflooded with the medium-sized tool in less than 30 minutes.

How Does the Water Claw Work?
Water Claw Flood Tool    The purpose for standing on the Water Claw is not to "squash" the carpet and pad to release water, but simply to facilitate a tight seal between the tool and the face fibers.
Water Claw Flood Tool    The water seal against the bottom plate causes a restriction in airflow, which maximizes existing suction capabilities inside the Water Claw suction manifold. This increased suction not only wants to replace its negative atmosphere by drawing water into the vacum chamber, but because of the several holes placed against the saturated surface, your vacuum's "sub-surface" flood lifting power is supercharged in the same way lifting force is multiplied with a pulley system.
Water Claw Flood Tool    Because the Water Claw is not limited to sucking water off the top side of carpet only, there is no need to use heavy weights concentrated onto a small area for extraction results. The Water Claw operator can be assured that there is no threat of damaging backing in its vulnerable wet state or forcing water through wood sub-flooring.

Products for Water Restoration and Treatment of Flooded Carpets:

Additional Water Damage Information:

Water Claw Flood Tool Order Form:

  Cat. No.: Item Size: Item Price: Desired Quantity:
30642 Water Claw® Flood Tool small deluxe 8x14 $439.00
30644 Water Claw® Flood Tool medium 10x17 $549.00
30645 Water Claw® Flood Tool large 12x21 - SPECIAL ORDER ONLY $659.00

Water Claw Flood Damage Recovery Tools are non-discountable. Prices subject to change without notice. NO FREIGHT ALLOWANCE!

To add this item to your current order, select the unit size you would like (if there is more than one) from the checkbox above, place the number of units you would like in the "Desired Quantity" box and click on the "Order Item" button..
Print