Sta-Clene® Formula 940
Soil & Stain Repellent
Protect Stone, Marble, Grout and Soft Surfaces from Spills and Stains

Sta-Clene Fabric Protector Brochure

  • Sta-Clene is a solvent-based fluorochemical formulation with exceptional oil, water and soil repellency.
  • Sta-Clene contains no silicone.
  • Provides a barrier to dry soil and spills of water-and oil-based materials.
  • Reduces soiling and staining. For stone surfaces such as marble, travertine, slate, limestone, granite, terrazzo, sandstone, mexican tile, saltillo, pavers, non-glazed ceramic tile, non-glazed porcelain tile and non-epoxy grout as well as soft surfaces.
  • Not for use on epoxy grout, leather, vinyl, rubber, VCT, laminates, wood or solvent-sensitive surfaces.
  • May also be used on soft, absorptive surfaces.


  1. Ready to use. For porous hard and soft surfaces.
  2. Test before using.
  3. Apply in a fine mist using a less than 60 psi airless pressure sprayer. Do not aerosolize or mist into the air. DO NOT USE A POWER SPRAYER!
  4. When applying Sta-Clene, use a solvent-resistant water-free sprayer such as Bane-Clene's Stainless steel sprayer.
  5. May also be applied with a microfiber applicator.
  6. Coverage: 200 - 300 sq. ft./qt.
  7. On stone and grout, be sure surface is dry before applying. Allow to soak in and then remove excess by wiping off with towels or bonnet - do not leave on the surface.
  8. On glazed ceramic tile, after applying & before drying, squeegee excess into the grout before the product dries Remove from the glazed tile with towels or bonnet before the product dries.
  9. Reapply after any deep cleaning.
  10. May also be used on soft, absorptive surfaces.
  11. Clean pressure sprayer daily.


  • Use only in open, well-ventilated area.
  • Keep vapors from extreme heat or open flame.
  • Avoid breathing vapor or spray mist.
  • Avoid contact with eyes or skin.
  • Remove any pets and small children from area until surface is dry.


  • Use Concentration: Undiluted.
  • Coverage: 200 - 300 sq. ft./qt.
  • Use pH: Not applicable to solvents.
  • Dry Time: Usually 30-60 minutes.
  • Full-cure Time: Usually 24 hours.

May not be shipped by air!

Do not dispose of Sta-Clene or any other solvent-based products into drains. Keep away from fire, open flame and sparks.


NOTE: Some smoke alarms are very sensitive and may go off when spraying Sta-Clene.

Certain restrictions may apply in some states.

Related Protector Products:

Material Safety Data Sheet on Sta-Clene.

Label for Sta-Clene Protector.

Order Form:

  Cat. No.: Item Size: Item Price: Desired Quantity:

10143 1-11 Quarts Sta-Clene (price/quart) $9.95/quart
10143 12 Quarts (1 case) Sta-Clene $107.40/case of 12 quarts
40110 Sta-Clene® Lasting Beauty triple panel Brochures - Packages of 25 $2.00/ pkg of 25

Sta-Clene is discountable. Sta-Clene® Lasting Beauty triple panel Brochures are non-discountable. Prices subject to change without notice.

To add Sta-Clene and/or brochures to your current order, select the unit size you would like from the checkbox above, place the quantity you would like in the "Desired Quantity" box and click on the "Order Item" button.