StoneTech™ Professional™
Restore™
Restoration Cleaner
for Ceramic Tile and Grout

StoneTech Restore Heavy Duty Acidic Grout Cleaner

Highly concentrated, heavy duty acidic restoration cleaner that makes ceramic tile & grout look like new.

Removes soap scum, hard water deposits, grout haze and efflorescence. Formulated with advanced cleaning technology that breaks down even the toughest stains.

For cleaning of ceramic tile, grout, and masonry.

Restore will etch most polished marble, travertine, limestone and other acid-sensitive surfaces. Will not etch or corrode MOST metal surfaces, but use with caution around metals and tape off all metals that may be contacted with Restore. Do not empty into your customer's stainless steel sink!

If the customer's floor is acid-sensitive, simply apply OSR (hot), agitate and rinse after 1/2 hour.

Restore Heavy Duty Acidic Cleaner can be used instead of Muriatic acid in most traditional applications including hard surface etching and cleaning, dissolving water insoluble salts including calcium carbonate, soap scum residues, efflorescence and other insolubles or calcium carbonate minerals to cleaning or preparing hard surface masonry of all types of tile, grout, stonework, and concrete.

For cleaning ofporcelain tile, ceramic tile, grout, and masonry. For etching of marble, limestone, and travertine.

  • Restores grout haze.
  • Removes grout residue.
  • Safe to use.
  • Biodegradable.
  • Highly concentrated.
  • Degreasing cleaner.
  • Removes efflorescence.
  • Removes soap scum.
  • Removes hard water spots.
  • No hazardous vapors.
  • Use on porcelain and glass.

Directions:

  • Test in a small inconspicuous area to determine the effectiveness and desired results.
  • Heavy duty mixture may darken some surfaces.
  • Restore will etch most polished marble and limestone surfaces!
  • Make sure all surfaces to be cleaned are swept or vacuumed to remove loose debris.
  • Make sure there are no topical waxes or sealers on surface.
  • Dilute with warm water only.
  • Do not mix with other chemicals.
  • Mask off and protect any baseboards or adjacent areas to avoid splashing, dripping, and overspray onto surfaces not intended to be cleaned.

Application Rates:

  • Light-duty cleaning: Mix 8 ounces per gallon of warm water.
  • Medium-duty cleaning: Mix 32 ounces per gallon of warm water.
  • Heavy-duty cleaning: Mix 64 ounces per gallon of warm water.

Directions:

  • Apply mixed solution with a brush, sprayer, scrub brush, clean mop, towel or sponge.
  • Agitate with a scrub brush or floor machine as needed.
  • Remove using a sponge, wet/dry vacuum or damp mop.
  • Rinse area well with clean water.
  • Thoroughly rinse all metal surfaces with clean water.
  • Clean and rinse equipment with water.
  • To prevent future staining, after complete drying, seal the grout with StoneTech Professional All Purpose Grout Sealer for Ceramic Tile.

Maintenance:

  • Routine Cleaning: Use StoneTech Revitalizer™.
  • Heavy Duty Cleaning: Pre-clean with StoneTech Klenz All™.

pH: 1

NOTE: May not be shipped by air.

Coverage: Approximately 2,000 to 10,000 sq. ft. per gallon depending on stone, porosity, texture of surface and method of application.

Proper Care:

On-Line Informational Video for Restore:

 For Broadband Connection

Related Products:

Related Articles:

StoneTech™ Professional Products™ Material Safety Data Sheets

NOTE: Cannot be shipped by air because of its pH.

Order Form:

  Cat. No.: Item Size: Item Price: Desired Quantity:

61203 Gallon, Each $37.95

Non-discountable. Prices subject to change without notice.

To add this item to your current order, select the unit size you would like (if there is more than one) from the checkbox above, and place the number of units you would like in the adjacent box.
Print