The Perma-Mount® 70

from Bane-Clene®

Perma-Mount 70 truck-mountThe Perma-Mount® 70 carpet cleaning equipment is an entry-level truck-mounted system designed especially for fuel-efficient mini-vans, which will fit into almost any garage or tight area. This carpet cleaning system is ideal for areas where extreme distance between jobs is a concern. It has the storage capacity, in many instances, to perform a full day's work.

Triple heating system: Wasted engine heat automatically heats your cleaning solution to the right temperature and an auxiliary electric heater are used for water temperature control. The large insulated tanks enable you to clean all day without having to refill or dump water. The system is totally electric, with no dangerous or expensive fuels required. It is not necessary to operate truck engine while cleaning.

Note: Perma-Mount 70 may not fit into all makes of mini-vans. Please call with size specifications. Will need exact height, width, length clearances.

SPECIFICATIONS:
ELECTRICAL SYSTEM:
Power Unit:
Two 110 V, 60 Hz Single Phase HD Electric Motor Units with Sealed Bearings, Requires No Maintenance.
Power Supply:
Two 4', HD 3-Wires with Ground, Insulation, Vinyl Wrapped for maximal safety, Two 100 ft extension cords.

SOLUTION SYSTEM:
Pump:
Positive Displacement, HD Cast Body, Sealed Bearings, Requires No Maintenance.
Pressure:
0 to 150 P.S.I., Fully Adjustable, Output only .6 GPM, Optimal Water Usage.
Filters:
In-line, HD Brass One-way Filtering System, three 50 Mesh, One 100 Mesh Filter-in System prevent Jet Clogging.

VACUUM SYSTEM
 Pump:
Positive Displacement, Modified SAV, Cast Iron Body, 2" Intake and Outlet Ports with Lobe Type Impellers for Iong life.

Gauge Package:
Solution Pressure, Amperage Monitor.

Accessories:
 Steel Reel Assembly (complete with 150' Solution Hose, 150' Vacuum Hose, and two Power Supply Cords), 12" and 4" Cleaning-Head Package (w/Stainless Steel Guide Handle), Standard Installation, Complete Training Program, Operations Manual.

AUXILIARY TANK SYSTEM
 SOLUTION SUPPLY SIDE
Construction:
HD, 14 Gauge,Stainless Steel, Mounts to Recovery tank with special Bolted Brackets, solution / detergent dilution gauge on tank.
Capacity:
 70 Gal., w/3" Capped Fill Port.
Dimensions:
 18" W, 22" H, 43" L.
Heaters:
 Tank immersion heater with 25 ft cord with holding strap and 20 ampere heavy-duty plug and receptacle.
All Stainless Steel Heat Exchange System. System uses otherwise wasted engine heat to keep water temperature at safe level. Truck engine heats water while driving at no additional cost to you.
Insulation:
1" FSK Fiberglass Insulation, Protected by Metal Tank Cover. Maintains water temperature.
Weight:
75 Ibs.
Gauge Package:
Temperature, Sight Gallonage Indicator for accurate temperature control and chemical blending.

RECOVERY SIDE TANK
 Construction:
HD, 12 Gauge, Stainless Steel, Baffle Reinforced, Bolts to Truck Frame for optimal safety.
Capacity:
70 Gal.
Dimensions:
11" H, 45" W, 40" L.
Weight:
 175 Ibs.
Discharge:
3" Knife Valve with 10' Discharge Hose to direct waste water to drainage receptacle.

ACCESSORIES:
 Steel Reel Assembly (complete with 150' Solution Hose, 150' Vacuum Hose, and Power Supply Cord), 12" and 4" Cleaning-Head Package (w/Stainless Steel Guide Handle), Two 100 ft extension cords, Standard Installation, Complete Training Program, Operations Manual.

Warranty:
5-Year Conditional Warranty.

Related Products:

Related Articles and Information:

Catalog No. 13 ......................... $10,495.00
F.O.B. Indianapolis, IN

Financing: Lease-Purchase Program Available.
Finance for as low as $7.59/day!
Note: Systems not available for purchase on-line

Print