Pro’s Choice OSR
Pet Urine Stain
and Pet Odor Remover

from Bane-Clene®

Pro’s Choice OSR Organic Pet Stain Remover    OSR, Pet Stain Remover, is formulated for extreme pet stain and pet odor contamination.

   The advantages of OSR are: no lingering fragrance, one-call treatment, complete stain removal, non-allergenic, and works in 30 minutes using the power of oxidation to remove both pet odors and stains.

   About 4-5 square feet/ diluted gallon

Directions:

EXTREME CONTAMINATION ELIMINATION WITH OSR:

OSR Method of Correcting Urine Odor and Stain Problems

 

 

 

   Introducing new generation chemistry, OSR odor and stain remover permanently removes pet urine odor contamination with the added benefits of no lingering fragrances, one-call treatment, complete stain removal, non-allergenic, and works in 30 minutes using the power of oxidation to remove both pet urine odors and stains. Follow these steps:

  1. Disengage the contaminated carpet and lay it back to fully expose the contaminated area.
  2. Cut the replacement pad to the exact shape you want by laying it over the contaminated pad and cut through both at the same time.
  3. Remove the new pad insert and set it aside until you need it later.
  4. Remove the old contaminated pad and discard it.
  5. Remove all dust and debris from the contaminated subfloor to be treated.
  6. Liberally apply Odor Barrier to the sub floor, gully area and the tackless strip.
  7. Be sure to cover evenly at about 2 ounces per square foot. If the tackless strip is not in good structural condition, replace it. If baseboards are contaminated, either seal or replace them. Do not use Odor Barrier on carpet face fibers!
  8. Cover sealed floor with 2 mil plastic sheeting. The sheeting should extend about 2 feet over the uncontaminated pad to prevent the OSR from wetting the good pad. Tuck the sheeting into the gully behind the tackless strip and force it to follow the contour of the floor and up the wall 4-6 inches so it forms a tray which will contain the OSR solution.
  9. Use masking tape to hold the plastic sheet in place while you are treating the carpet with the OSR solution.on.
  10. Prepare a bucket of the HOTTEST water possible (the hotter, the better) - NO DETERGENT! Add 1 rounded cup (8 ounces) of OSR to the hot water and mix until dissolved. Pour about 1 gallon of the OSR solution per 4 - 5 square feet of contaminated carpet and squeegee the solution around to saturate all the fibers.
  11. Allow at least 30 minutes dwell time.
  12. Extract the solution from the carpet only—dry extract only (vacuum only with no solution) to leave the carpet as dry as possible. Carpet may be stiff once it dries—customer can simply vacuum up the next day
  13. Check carpet for urine odor and repeat if needed.
  14. Pull back the treated carpet (do not remove the plastic sheeting).
  15. Install the new pad you earlier prepared over the sheeting.
  16. Trim away the excess plastic that it overlays the original carpet cushion. Tape the new pad into place.
  17. Reinstall and stretch into place the carpet. Take care when using the power stretcher or knee kicker—carpet backing is weaker when it’s wet.
  18. Trim the sheeting along the wall, taking care not to cut into the dry-wall or the baseboards.
  19. Allow carpet to dry (at least 24 hours).
  20. NOTE: For light to moderate pet urine contamination, only 1 application is needed. For heavy to extreme situations, 2 applications are recommended.
  21. Do not use on natural fibers, such as sisal, wool or silk.
  22. Dispose of unused solution - solution loses its strength 15 minutes after mixing.
  23. Do not place solution in closed container as pressure from released oxygen may cause the container to leak or burst.
  24. Not compatible with products containing reducing bleaches, such as Natural Fiber Cleaner.

SUB-SURFACE EXTRACTION TECHNIQUE:

   If you do not want to pull carpet and are confident that the sub floor is NOT heavily contaminated, you can use the Water Claw™ Spot Lifter in conjunction with OSR to remove the pet urine from the carpet and the pad.

   Use caution on hardwood floors so as not to cause warping due to excess moisture for prolonged periods of time.

   More detailed information can be found in the manual written by Bane-Clene’s chemist, "Chemistry of Making and Maintaining Rugs and Carpets" and in the "Chemicals and Their Relation to Carpet Cleaning and Construction" videotapes.

Use Concentration: 8 ounces/gallon

Not for use on wool, sisal, silk or other natural fibers!

Material Safety Data Sheet for OSR in Adobe Acrobat format

Related Products:

Related Articles and Information:

Order Form:

  Cat. No.: Item Size: Item Price: Desired Quantity:

30539 6.5 lb. Jar, Each $38.95

Non-discountable. Price subject to change without notice.
To add this item to your current order, select the unit size you would like (if there is more than one) from the checkbox above, and place the number of units you would like in the adjacent box.
Print