The Mini-Mount®

Truck-Mounted Flexibilty for Mini-Vans

from Bane-Clene®

Mini-Mount Truck-Mounted Carpet Cleaning Extractor for MinivansThe Mini-Mount carpet cleaning equipment is the first truck-mounted system designed especially for fuel-efficient mini-vans, which will fit into almost any garage or tight area. This carpet cleaning system is ideal for areas where extreme distance between jobs is a concern. It has the storage capacity, in many instances, to perform a full day's work. The Base Unit can be portable in less than one minute.

Triple heating system: Wasted engine heat automatically heats your cleaning solution to the right temperature and an auxiliary electric heater is used for water temperature control. The large insulated tanks enable you to clean all day without having to refill or dump water. The system is totally electric, with no dangerous or expensive fuels required. It is not necessary to operate truck engine while cleaning.

Note: Mini-Mount may not fit into all makes of mini-vans. Please call for size specifications.

SPECIFICATIONS:
BASE UNIT

AUXILIARY TANK SYSTEM
SOLUTION SUPPLY SIDE
Construction:
HD, 14 Gauge,Stainless Steel, Mounts to Recovery tank with special Bolted Brackets, solution / detergent dilution gauge on tank.

Capacity:
 70 Gal., w/3" Capped Fill Port.

Dimensions:
 18" W, 22" H, 43" L.

Electrical System:
 All electric - 110V - 60 Hz - Single Phase
1 1/2 HP Vacuum Pump Motor with sealed bearings and manual reset overload protector (no maintenance).
1/2 HP Soluton Pump Motor with sealed bearings and manual reset overload protector (no maintenance).
Power Supply:
 2 - 15 ft power cords
All wiring 12 GAW - vinyl wrapped - insulated - HD
HD cord restraints on power cords for safety.
2 - HD power switches with watertight covers
Lighted heater switch with watertight cover
Separate vacuum and solution pump ampmeters to monitor equipment performance.
Amperage:
 Vacuum: 9 amps at 75% restriction.
Solution pump: 4 amps at 150 PSI
Solution pump with heater: 16 amps.

Solution System:
Pump:
 Positive displacement - HD cast iron housing.
Requires no maintenance.
Pressure:
 150 PSI operating pressure.
30% more GPM than previous unit.
0.6 GPM optimal water usage.
Filters:
 50 mesh - primary - HD brass filter.
50 mesh - secondary - brass inline filter.
Capacity:
 20 gallons solution.
Construction:
Stainless Steel.

Heaters:
 Tank immersion heater with 25 ft cord with holding strap and 20 ampere heavy-duty plug and receptacle.
All Stainless Steel Heat Exchange System. System uses otherwise wasted engine heat to keep water temperature at safe level. Truck engine heats water while driving at no additional cost to you.
Insulation:
1" FSK Fiberglass Insulation, Protected by Metal Tank Cover. Maintains water temperature.
Weight:
75 Ibs.
Gauge Package:
Temperature, Sight Gallonage Indicator for accurate temperature control and chemical blending.

RECOVERY SIDE TANK
Construction:
HD, 12 Gauge, Stainless Steel, Baffle Reinforced, Bolts to Truck Frame for optimal safety.
Capacity:
70 Gal.
Dimensions:
11" H, 45" W, 40" L.
Weight:
 175 Ibs.
Discharge:
3" Knife Valve with 10' Discharge Hose to direct waste water to drainage receptacle.

ACCESSORIES:
 Steel Reel Assembly (complete with 150' Solution Hose, 150' Vacuum Hose, and Power Supply Cord), 12" and 4" Cleaning-Head Package (w/Stainless Steel Guide Handle), Standard Installation, Complete Training Program, Operations Manual.

Warranty:
5-Year Conditional Warranty.

Financing:
Lease-Purchase Program Available.

Related Products:

Related Articles and Information:

Non-discountable. Price subject to change without notice.

Catalog No. 4 ......................... $11,995.00 F.O.B. Indianapolis, IN
F.O.B. Indianapolis, IN

 Financing: Lease-Purchase Program Available.

NOTE: Systems not available for purchase on-line.

Print