Klenz-All™ Cleaner
Heavy Duty Stone, Tile and
Grout Cleaner and Degreaser
from StoneTech™ Professional and Bane-Clene®
StoneTech Professional Klenz-All is a highly concentrated
professional strength heavy duty alkaline cleaner and degreaser that makes
cleaning easy. Great for all types of Natural Stone including Ceramic
Tile, Slate,
Marble, Granite,
Limestone,
Travertine,
Concrete, Masonry and Grout.
Formulated with advanced alkaline-based soil and grease cutting technology.
Will not etch polished surfaces. Removes greasy soil from stone and tile
floors, kitchen counters, bathroom shower stalls, and many other natural
stone and ceramic tile surfaces.
- Fast Acting
- Commercial Strength
- Highly Concentrated
- Non-abrasive
- Will Not Etch
- Acid Neutralizer
- Easy To Use
- Deep Cleaning Action
- Fresh Scent
- Acid Free
- Safe for all Natural Stone
- Multiple Use
For Use On:
Directions:
- Test in a small inconspicuous area to determine the effectiveness
and desired results.
- Make sure all surfaces to be cleaned are swept or vacuumed to remove
loose debris.
- Dilute with warm or hot water only.
- Do not mix with other chemicals.
- For extremely stained grout, you can add Chemspec Energizer to the Klenz-All solution to bleach the grout while cleaning
it.
- Apply mixed solution with a clean mop, towel, extractor or sponge.
- Agitate with a scrub brush or floor machine as needed.
- Remove using a sponge, wet/dry vacuum, extractor or damp mop.
- Rinse area well with clean water.
- To protect the areas from future soiling and staining, after complete rinsing and drying, apply StoneTech Impregnator Pro™ per label instructions.
- For regular maintenance and additional protection, use Revitalizer™ Daily Use Stone & Tile Cleaner and Protector or All Purpose Stone & Tile Cleaner.
Application Rates:
- Daily cleaning / neutralizing: Mix 4 ounces per gallon of hot water.
- Light-duty cleaning: Mix 16 ounces per gallon of hot water.
- Medium-duty cleaning: Mix 32 ounces per gallon of hot water.
- Heavy-duty cleaning: Mix 64 ounces per gallon of hot water.
Maintenance: Routine Cleaning: Use StoneTech Revitalizer with protector.
Coverage: Approximately 2,000 to 10,000 sq. ft. per gallon depending on stone, porosity, texture of surface and method of application.
pH: 11.5-12.5
NOTE: May not be shipped by air.
On-Line Informational Video for Klenz-All:
For Broadband Connection
Related Products:
Related Articles and Information:
StoneTech™ Professional Products™ Material Safety Data Sheets
Order Form:
|