StoneTech™ Professional
New & Improved Enhancer Pro™
Solvent Based Heavy Duty
Color Enhancing
Impregnator / Sealer
for marble, granite & other stone surfaces

   Enhancer Pro provides heavy duty color-enhancing protection to
natural stone such as granite, marble, limestone, travertine, slate, sandstone,
saltillo , masonry, brick,
flamed stone, tumbled stone,
and textured stone.

Enhancer Pro - Picture of half treated and half untreated stone with StoneTech Professional Enhancer Pro

New & Improved Formula!

Two-in-one heavy duty formula enhances the natural color of interior stone and prevents stains. Formulated with advanced, solvent-based fluoro-chemicals to protect against tough oil & water-based stains.

The new Enhancer Pro still enhances stone beautifully and provides great protection against the toughest stains, but it now offers some great additional benefits. The most exciting new benefits are hightlighted below:

  • Enhanced look now lasts up to 5 years in the sun! - Great for use outdoors.
  • Break through formula prevents enhancement from fading when exposed to sunlight.
  • Easier to use and clean up due to improved "dry-time technology".
  • Improved long-term stain resistance and durability.
  • New formula contains 4 times the amount of active ingredients.
  • Micro-molecular technology allows sealer to bond with the stone surface to deliver unsurpassed durability.
  • Antimicrobial product protection.
  • Improved surface coverage - new formula will cover 30-50% more square feet. Only 1 coat required for many stones.
  • Longer shelf life.
  • VOC compliant.
  • Enhances natural color.
  • Heavy duty protection against oil and water-based stains.
  • Low odor and easy to use.
  • Contains FDA-approved solvent.
  • Interior use.
Directions:
  1. Mask off and protect any baseboards or adjacent areas to avoid splashing and overspray onto surfaces not intended to be treated.
  2. Liberally apply an even coat of enhancer with a paintbrush, paint roller, or solvent-resistant, low-pressure sprayer.
  3. Allow to penetrate the surface for 5-30 minutes; denser material may require more time for enhancer to penetrate. During this time, distribute excess over entire area to insure even penetration. Wip off any excess prior to drying. DO NOT ALLOW EXCESS TO DRY COMPLETELY ON SURFACE! Failure to remove excess sealer may result in a film or residue that may need to be mechanically removed.
  4. A second coat is recommended for porous or absorbent surfaces and should be applied one hour after initial application as directed in steps 2 & 3.
  5. Do not walk on surface for at least 4 hours. Full cure is achieved in 24 - 48 hours.
  6. Clean equipment with mineral spirits.
  7. WARNING: The color enhancement is irreversible!

Coverage & Expected Wear:
Depending on type of stone, porosity, texture of surface and method of application -
Coverage: approximately 200 - 1,000 sq. ft. per gallon.
Expected Wear (with proper care):
3 - 5 years on interior surfaces.

Proper Care:
To maintain the stone’s natural beauty, clean surface as needed with StoneTech Professional Revitalizer™ or All Purpose Stone & Tile Cleaner .

pH: Not applicable to solvent-based products

Related Products:

Related Articles:

StoneTech™ Professional Products™ Material Safety Data Sheets

Order Form:

  Cat. No.: Item Size: Item Price: Desired Quantity:

61223 Gallon, Each $223.95

Non-discountable. Price subject to change without notice.
To add this item to your current order, select the unit size you would like (if there is more than one) from the checkbox above, and place the number of units you would like in the adjacent box.

NOTE: For professional use only! Not for use by consumers!

Print