Truckmount
Descaler
from Bane-Clene®
For Descaling Truck Mount Solution Tanks
for removal of hard water deposits in Bane-Clene truckmounts
Powdered formulation. Inhibitor helps protect steel components.
Directions:
- Drain one-fourth of solution tank and reheat to 180 degrees F.
- Pre-dissolve 2 lbs Descaler by slowly sprinkling while stirring into a 5-gallon pail. 5 lbs may be required for severe scale formation.
- Add to solution tank.
- Drive the truck for at least one mile to allow the solution to "slosh" around in the tank and loosen the scale.
- Drain solution.
- Rinse tank with water.
- Fill tank with water and add detergent solution to neutralize the acid.
- Circulate cleaning solution at least 5 minutes to ensure complete neutralization of the acid.
- Flush out the solution tank and recharge.
Use pH: 1
NOTE: May corrode brass, aluminum and other metal components.
NOTE: May not be shipped via air!
Click for a Material Safety Data Sheet on Descaler in Microsoft Word format.
Order Form:
|