High Power
Non-Ammoniated,
Fast Acting,
Wax Stripper that
Removes all Water-Based
Floor Finishes

from Bane-Clene® & Chemspec

A low foaming and quick acting formulation saves you time and labor

High Power Wax Stripper

   Hi-Power Stripper removes multiple layers of tough build-up of finishes, waxes and urethane fortified finishes FAST, while staying wet longer for greater productivity.

   Excellent wetting penetration and emulsification properties.

   Hi-Power Stripper leaves behind a pleasant fragrance.

   No pH neutralizing rinse required.

MIXING DIRECTIONS:

    Light to Medium Finishes or Asbestos:
  • Mix 6 ounces to 1 gallon of water (20:1).
    Regular Finishes or Combination Sealer and Finish:
  • Mix 12 ounces to 1 gallon of water (10:1)
    For Thick or Older Finishes:
  • Mix 32 ounces to 1 gallon of water (4:1)
USE DIRECTIONS:
  1. Apply stripper with a clean mop. Allow to penetrate.
  2. When finish turns milky white, agitate using a mop or floor machine with a BLACK stripping pad.
  3. Remove using a wet/dry vacuum, damp mop, or an automatic floor scrubber machine.
  4. Rinse area well with clean water and pick up the rinse water.
  5. Allow surface to dry well before applying a sealer or floor finish.
FOR AUTO SCRUBBERS:
  1. Apply stripper to the floor on the first pass. Allow to penetrate for 5 - 10 minutes.
  2. On the second pass, run only the brush or floor pad.
  3. On the third pass, pick-up stripper with vacuum system.
  4. Rinse area well with clean water and mop.
  5. Allow surface to dry well before applying a sealer or floor finish.

Coverage: 500 sq. ft. per gallon

Use Concentration: Light: 1:20 (6 ounces/gallon). Medium: 1:15 (8 ounces/gallon). Heavy: 1:10 (12 ounces/gallon)

Use pH: 12 – 13

NOTE: May not be shipped by air.

Related Products:

Related Articles:

Click for a Material Safety Data Sheet on High Power Wax Stripper (in Adobe Acrobat format).

Order Form:

  Cat. No.: Item Size: Item Price: Desired Quantity:

61006 Gallon, Each $25.95

Non-discountable. Prices subject to change without notice.
To add this item to your current order, select the unit size you would like (if there is more than one) from the checkbox above, and place the number of units you would like in the adjacent box.
Print